1、confirm that the parameters in the nameplate meet your requirement.
2、confirm that the motor is not damaged.
3、remove the shaft holder (if the motor has) from the shaft extension, and reinstall it before transportation once more.
4、lifting eyebolts and other lifting devices must be tightened before lifting, and they are only used for lifting the motor. if there are more than one lifting lug, they must be used together to bear the weight.
5、after installation, confirm that the mounting (im) is in line with the identification on the nameplate. check that the drain holes are at the lowest position. any question, please contact us;.
6、rotate the motor shaft extension slowly to verify that the motor can have free rotation.
note before motor installation-新利体育
作者： admin 时间：2016-08-05 来源：http://www.hengdamotor.com/
摘要：1、confirm that the parameters in the nameplate meet your requirement. 2、confirm that the motor is not damaged. 3、remove the shaft holder (if the motor has) from the shaft extension, and reinstall it before transportation once more. 4、...
news
contact
contact
contact
we'd like to hear your voice
tel：4000-999-510
q q：25488769
e_mail：[email protected]
address：无锡市新吴区城南路218